At a Glance
One of the Most Energy-Efficient Systems in its Class
The system uses only 35.33 kWh in off mode, reducing overall CO2 emissions. By complying with energy efficiency standards like IEC 60601-1-9, ErP, REACH, and RoHS, it ensures minimal environmental impact. Additionally, the transition from USB options to e-licensing reduces material usage, transportation, and disposal loads, further contributing to sustainability.
 |
Standby power after clinical hours
Gantry and couch motors, generator main circuit, operating panel monitor, console monitor power turned off |
 |
Saves space with the smallest footprint in its class. Minimum Footprint: 14.8m² |
 |
Space-saving features such as in-built cameras and rounded design contribute to easy installation and allow use in most standard CT rooms. |
 |
Leverages AI and automation to create an efficient and eco-friendly workflow. It reduces workflow steps by 40% and scan planning time by 24%*1. |
 |
Parts recycling rate at time of disposal: 84% (based on metal usage rate) for systems for global use |
 |
Packaging is eco-friendly, using 79% wood, 15% cardboard, and only 6% plastic. We are also reducing packaging materials for CT Gantry covers by 30.4%*2. |
| Any certification for energy efficiency of the product, proof of compliance with COCIR regulations complies with IEC 60601-1-9 “Environmental product design for medical equipment”, ErP, REACH, and RoHS. |
*1Based on study performed at Hakujyuji Hospital, Japan, with 40 cases, 10 technologists comparing manual scan planning on GENESIS Edition with automatic scan planning on Serve for body examinations.
*2Internal comparison to previous packaging.
*2Internal comparison to previous packaging.
Our Sustainable Solutions
Energy
Significant Energy Savings
|
Scanning just became more sustainable than ever before. |
Saving power outside clinical hours
Gantry/couch, generator main circuit, CPU, and monitor power turned OFF when not in use.If the console is turned OFF with the power supply mode set to the synchronised-switching mode, the power of the detector is automatically turned OFF.
Energy saving scanning
More energy-efficient scanning through PUREVISION Detector, Advanced intelligent Clear-IQ Engine (AiCE), SUREExposure 3D, Adaptive Iterative Dose Reduction (AIDR 3D).Reduced running costs
Reduce running costs with 5.0MHU tube while still providing high-quality images with less noise, thanks to noise reduction technologies such as AiCE* and AIDR 3D.*Option
Weight/Space
Real Resource Savings
Aquilion Serve saves space with the smallest footprint in its class. Its compact and space saving dimensions contribute to easy installation without large construction with a wide bore 80 cm, flared gantry, delivering comfortable exams for patients and easy to access to patients from the front or rear of the gantry.
|
Built-in positioning camerasSpace-saving features such as in-built cameras and rounded design contribute to easy installation and allow use in most standard CT rooms. |
|
Minimum Footprint: 14.8m² (with short couch) |
| 220kg short | |
|---|---|
| Min footprint | 19.3m2 |
| Scan room | 14.8m2 |
| Control room | 4.5m2 |
Innovative hardware solutions designed for sustainability
Compact look despite wide bore
In its segment, only Aquilion Serve has an 80-cm wide bore.Its round face design maintains a compact look, in spite of the bore size. The overall sleek and efficient design has been awarded both a Good Design Award and an iF Award.
 |
Optimising hardware
The size of the keyboard and control panel has been optimised, which saves space for other peripheral equipment while providing the 27-inch monitor for easy viewing.Aquilion Serve has two software touch panels, whereas previously patient positioning was carried out with buttons only.
Workflow
Our Advanced Workflow Solutions
With high staff and energy commitments, every second counts in medical imaging. AI-supported imaging solutions mean faster procedures and greater diagnostic confidence.
Aquilion Serve leverages AI and automation to create an efficient and eco-friendly workflow. By reducing hardware needs through software upgrades and simplifying system operations, it reduces workflow steps and saves scan planning time. Easy to use and easy to learn console operation optimises staff allocation, reducing the burden on overworked personnel and improving work satisfaction. The system also enters power-saving mode automatically, reducing standby power consumption. Enhanced imaging quality and protocols enable more accurate diagnosis, while lower radiation doses and reduced contrast agent use further improve patient care and environmental impact. |
Reduction of burden
on the operator |
 |
Reduction of
operation steps |
 |
Reduction of
operation time |
Workflow Solutions that Enhance Efficiency and Boost Productivity
The INSTINX workflow experience incorporates intuitive design and automated features for improved efficiency. AI-enabled solutions such as Anatomical Landmark Detection (ALD) support fast and consistent scan planning, while 3D Landmark Scan assists with scan range setting.
INSTINX- A patient-centric end-to-end CT workflow
40%
reduction in workflow steps
97%
accuracy in scan range setting with 3D Landmark Scan *2
More consistent
Scan planning between technologists and reduction in the number of clicks with ALD*1
*1 Based on a study performed at Hakujyuji Hospital, Japan with 40 cases, 10 technologists comparing manual scan planning on Aquilion ONE with automatic scan planning on Aquilion Serve for body examinations.
*2 Based on an ALD evaluation of 240 3D Landmark scans (40 Head, 200 Body). Cases in which the relevant anatomic landmark(s) were not present (9) were excluded. 97% accuracy is based on results within +/- 1cm of target start, end, and FOV position, confirmed by two experienced CT Technologists.
*2 Based on an ALD evaluation of 240 3D Landmark scans (40 Head, 200 Body). Cases in which the relevant anatomic landmark(s) were not present (9) were excluded. 97% accuracy is based on results within +/- 1cm of target start, end, and FOV position, confirmed by two experienced CT Technologists.
Optimised Workflow for Energy and Resource Saving
Reduced burden on operators
Improvements in workflow contribute to reduction of the burden on overloaded staff members, better work satisfaction and at the same time it also support optimisation and flexibility of technologist allocation.
Efficient access to diagnostic data
Features such as automatic hanging layouts and SURE Subtraction integrated into the protocol eliminate the need for extra steps for scan reading.
Improved efficiency through better image quality
Advanced intelligent Clear-IQ Engine (AiCE) is available for all body regions, providing sharp, clear and distinct images for more confident diagnosis.
Streamlining the Diagnostic Experience
Reduction of dose, less overscanning
A recent study shows the reduction of overall radiation dose and less overscanning with automatic scan planning.
Reduction of contrast agents
Iodine mapping SCT provides excellent visualisation of the contrast enhanced region, which may contribute to the overall reduction of contrast agents.
Low dose lung exams
SilverBeam with AiCE can provide a low dose exam for lung screening.
Recycling
Recycled materials and minimised waste
Aquilion Serve is designed with circularity in mind, using 85% recyclable materials and achieving an 84% recycling rate at disposal. Key recyclable components include iron, aluminum, lead, and FRP batteries. The system complies with global environmental regulations, such as RoHS, REACH, and WEEE, to avoid hazardous substances. Additionally, efforts are made to minimise waste through reuse of X-ray tubes, reducing environmental impact. The packaging also adheres to regulations in various regions, and Aquilion Serve ensures minimal CO₂ emissions during transportation, contributing to an eco-friendly product lifecycle.
| Recycling | |
| Parts recycling rate at time of disposal | 84% (based on the metal usage rate) |
| Iron | 1941.80 kg |
| Aluminum | 361.77 kg |
| Lead | 16.79 kg |
| FRP | 139.98 kg |
| Batteries | 8 batteries |
Packaging / Logistics
Greener Transport, Distribution and Logistics
Canon Medical is striving to reduce the CO₂ emissions of product transportation through a modal shift from truck and air transportation to rail and ship transportation.
Introducing a new concept for equipment transportation, we have started using dedicated shipping containers, eco-friendly packaging material (biodegradable fibers, etc.) and only FSC certified wood.
We are focused on reducing the amount of packing materials used for transporting products by simplifying the packing process and decreasing the number of units for each system. Aquilion Serve's packaging is eco-friendly, using only 6% plastic. By reducing packaging materials for CT gantry covers by 30.4% and switching to steel frames for Japan transport, wood waste is minimised, enhancing sustainability.
Introducing a new concept for equipment transportation, we have started using dedicated shipping containers, eco-friendly packaging material (biodegradable fibers, etc.) and only FSC certified wood.
We are focused on reducing the amount of packing materials used for transporting products by simplifying the packing process and decreasing the number of units for each system. Aquilion Serve's packaging is eco-friendly, using only 6% plastic. By reducing packaging materials for CT gantry covers by 30.4% and switching to steel frames for Japan transport, wood waste is minimised, enhancing sustainability.
| Aquilion Serve | ||
| Product packaging | Reusable shipping cartons are used for some parts (Container, gantry transport steel frame, couch crate) | |
| Packing materials (Calculation: from US and Europe) | Wood | 79% |
| Cardboard and paper | 15% | |
| Plastics, Others | 6% | |
| Open packaging (Domestic delivery) | 530 kg | See-through wooden crate (gantry, console box, power distributors)
Returnable box (couch, peripheral components) Cardboard box (gantry covers, console ST-NAVI box, RDD) |
| Closed packaging (Overseas delivery) | USA, European subsidiaries: 598 kg or less
Other countries: 850.3 kg or less |
|
Due to medical device regulatory reasons, not all products/service displayed on this Canon Medical Systems ANZ webpage are available in all countries, regions or markets. Future availability of the products/service cannot also be guaranteed. Please contact your local Canon Medical Systems representative for further details.
